To determine how much product you need for your craft we have listed below a chart showing the various sizes of boats and the product required. If your boat is in between the lengths given, you will need to order the next size up.
Up to 30ft single deck | 1 complete boat kit |
Up to 30ft flybridge | 1 kit and 1 extra 110ml glaze |
Up to 40ft single deck | 1 kit and 1 extra 110ml glaze |
Up to 40ft flybridge | 1 kit, 1 x 500ml prep and 2 extra 110ml glaze |
Up to 45ft single deck | 1 kit and 2 extra 110ml glaze |
Up to 45ft flybridge | 1 kit, 1 x 500ml prep, 3 x 110ml glaze |
Up to 50ft single deck | 1 kit, 1 x 500ml prep, 3 x 110ml glaze |
Up to 50ft flybridge | 1 kit, 1 x 500ml prep, 4 x 110ml glaze |
Up to 60ft single deck | 1 kit, 1 x 500ml prep, 4 x 110ml glaze |
Up to 60ft flybridge | 1 kit, 2 x 500ml prep, 5 x 110ml glaze |
Up to 70ft single deck | 1 kit, 2 x 500ml prep, 6 x 110ml glaze |
Up to 70ft Flybridge | 1 kit, 2 x 500ml prep, 8 x 110ml glaze |
Vessels above this size | Please call 01795 592640 for quantity requirements |
Please note: When any form of compounding is done prior to AGlaze sealant application you must make sure that the compound does not contain a wax finish. We also reccommend you add an addtional 25% of any sealant product to your order, as this will be porous and will require addtional coats.
You will need to also order either for GRP or painted surfaces as the glaze used is different. If your boat is GRP and has been painted, you will need to order the painted version.
For sailing yachts refer to single deck craft.
It is recommended that extra wash n shine shampoo is purchased to help maintain the finish created by AGlazing throughout the season – please see our special offers page.
For damaged gelcoats that need to be cut back and restored, extra glaze may be needed. Pre-cut is recommended to be used first to bring back gelcoat that has been damaged by UV rays.
For coating superyachts, a square meterage will need to be known. One litre of superyacht glaze will coat 180 square metres of painted surface.
If in any doubt – please call the AGlaze team on 01795 599880 or email: michael@marineaglaze.com or clive@marineaglaze.com