Testimonials

I went down to look at the boat on Friday to see how she looked - Amazing!!! I will be pleased to promote your products.

Mr B - South of England ref: Targa 50


A Glaze Marine Craft Surface Sealant

A GLAZE SURGERY - PRESCRIBING THE PERFECT REMEDY FOR KEEPING YOUR BOAT LOOKING PRISTINE

Many potential customers and existing customers do not always know which is the best product to use in solving maintenance issues. On this page we have tried to give advise on what our products can achieve in solving many of these issues.

All products prescribed below are available to purchase through the A Glaze website or by calling one of the team.

YELLOWING ON HULL - Remove with Heavy duty hull cleaner

SCUFF MARKS ON DECKING - Remove with eradicator sponge or deck cleaner

MILDEW ON CANOPY - Remove with wash n shine shampoo and stop regrowth with out canopy kit

MY BOAT HAS BECOME CHALKY AND HAS LOST IT'S COLOUR -First use the Pre Cut with a machine if possible - up to max 1800 revs. Then use our prep and additional coats of glaze, around 25% as you need to fill the pores to stop fading. Call for further info and assistance on quantities or for advise on 01795 599880

LACK OF SHINE ON GRP - Short term remedy - Active 3, Long term remedy - Marine A Glaze kit

MARKS ON VINYL SEATING - Remove with the Nano Kit and seal with vinyl and leather protector

DIESEL SMELLS IN CABIN - Extinguish with Air Purifier

MILDEW GROWING IN CABIN DURING WINTERISATION - Wipe out with Silver room spray

CLEANING FENDERS - Clean with fender restorer and protect with dinghy sealant to keep pristine

BLACK STREAK MARKS - Marine preparation for stubborn marks or eradicator sponge

DULLNESS/FLATNESS TO GRP - Cut back with precut and protect with marine kit

RESTORING STAINLESS STEEL CLEATS - metal restorer or polish

RUST STAINS ON GRP - Deck cleaner/hull cleaner/eradictor sponge - depending on the depth of the stain

PROTECTING CARPETS AND UPHOLSTERY - Fabric protector

TEAK DECKING HAS TURNED GREY - Use the teak care kit to replenish colour and if required seal with teak sealer

LIMESCALE STAINS ON SHOWER SCREEN - clean and seal with crystal vision

POOR VISION ON WINDSCREEN WHEN RAINING/TRAVELLING AT SPEED - clean and seal with crystal vision and reduce the need to use windscreen wipers.

LEATHER SEATING HAS CRACKED - repair with our leather kit.

THE BOAT IS DULL WHEN I WASH IT - stop using jif or fairy liquid as you are harming the surface of the boat - use wash n shine shampoo which contains a small amount of glaze.

MY TENDER IS ALWAYS DIRTY - clean with our new rib and dinghy cleaner and seal with our rib and dinghy sealant.

PLASTIC/VINYL WINDOWS ARE DULL AND I CANNOT SEE THROUGH THEM - PVC restorer will replenish them and create a clear window again. This will also fill in surface scratches.

POLYCARBONATE HATCHES ARE SCRATCHED - PVC restorer will fill in surface scratches however if the crazing in inside the polycarbonate there is nothing we can do with the scratches.

MY BOAT IS PAINTED AND I AM PLANNING A RESPRAY - Resprays can cost an enormous amount of money - A Glaze reduces the need for a respray as it prolongs the life of the paint work. For example a narrow boat could be £8000 for a respray - when costing how much glaze is needed you could be looking at as little as £400.00 - what a saving!!

MY BOAT HAS ANTIFOUL AND IS TAKEN OUT AT THE END OF EACH SEASON - One tip we discovered from a customer at the Boat show who has a small boat and takes it out at the end of the season to give it a basic coat of antifoul is to use the heavy duty hull cleaner neat and leave on for a prolonged period of time to remove the thin layer of antifoul - he said it saved him hours of work!!!

MY CANOPY HAS GREEN STAINS FROM ALGAE - We are in the final testing stages of our new canopy cleaner which should remove the green staining and replenish the colour of the canopy. We understand that this is an enormous problem for boaters so please keep an eye on the web to see when its official release is. Once you have the canopy clean please always seal it to stop the mildew and algae from returning.

SOMEONE ON THE BOAT THROWS TEA DOWN THE SINK AND DOESN'T WASH IT AWAY SO IT HAS STAINED THE GRP NEAR TO THE SINK OUTLET!!! - Why does no one ever admit to this!!! We have found the best way to remove this stain is either by using the eradicator sponges in the nano kit as the nano lubricant just aggitates the stain more or if it is quite bad use the marine preparation.

This page will be updated regularly so please visit again in case we solve an issue you have or email clive@marineaglaze.com who will try to solve an issue or call +44 1795 599880.

 

 

 

 

A Glaze Marine Craft Surface Sealant